Industrial machine vision with AI
We build machine vision systems that inspect products on the production line, measure, count and watch hazardous zones in real time. Every project starts from our own industrial software, VisiolineLT, together with industrial cameras and NVIDIA Jetson edge computers, so you are not paying for development from scratch.
Tell us what you want to detect. We will tell you honestly whether machine vision is the right tool for it and how we would approach it.
Discuss your projectCall +372 504 9966
- IT and software company in Estonia since 2010
- OK/NOK decision in under 100 ms from image to signal
- Free pre-sales consultation
Applications
What machine vision can do on your line
If a person can see a problem on the line, a camera system can usually be taught to see it too, and it does not get tired at the end of a shift. These are the tasks we are asked to solve most often.
Why Visioline
Experience that is already built into the software
Software that already exists
VisiolineLT is our industrial quality control platform: several cameras, a web interface in five languages, statistics, and model training in the browser. Your project adapts it rather than writing everything again.
Models that explain
With vision-language models the system does not just say “defect”. It describes what is wrong. In many cases a new check can be set up in plain words, without training a model first.
The right hardware
Industrial cameras up to 8K and line-scan cameras up to 16K, optics, lighting and fanless edge computers. Where your existing cameras are good enough, we use them.
Integration with your systems
Results go where you need them: PLC, SCADA, ERP/MES or analytics, over OPC-UA, Modbus, MQTT or a REST API, with reports in Power BI or Grafana.
Your data stays on site
Models can run on a local server or edge computer, so production images do not have to leave your network.
Support after launch
Production changes: new products, new packaging, new defects. We maintain the system and retrain the models when needed.
Products
What we build on
VisiolineLT
Industrial quality control software with multi-camera support, live view, statistics and browser-based model training. More on machinevision.ee
CleanView
An all-in-one machine vision device for up to six cameras and 8K resolution, with edge AI processing in a compact industrial enclosure. Read about CleanView
AI camera
A configurable camera for machine vision projects where sensor, lens and processing have to match the task. AI camera
Image processing tool
A desktop tool for developers: build an image processing pipeline visually, test it on your own images and export Python code. Machine vision image processing tool
Process
From the first meeting to a working line
A typical project takes two to four months from the first meeting to launch. It is faster when existing software and models can be reused.
-
Analysis and project plan
1–2 weeks
A meeting, mapping of the process and a feasibility assessment. You get a project plan.
-
Solution design
2–3 weeks
Hardware selection, placement of cameras and lighting, technical specification.
-
Development
4–8 weeks
Model training on your images and adapting the software. The result is a working prototype.
-
Pilot on the line
2–3 weeks
Accuracy is measured and validated in real production conditions.
-
Launch
1 week
Full deployment and training for your staff.
-
Support
ongoing
Maintenance, model updates and improvements as your production changes.
Return on investment
Does machine vision pay off?
The return comes from less scrap, fewer customer complaints and less time spent on manual inspection. A simple way to estimate it:
ROI = (annual benefit − cost) / cost
For example, if a system costing €30,000 saves €60,000 a year in scrap and inspection time, the first-year ROI is 100% and the investment pays for itself in about six months. In manufacturing, the payback period is typically between 6 and 18 months.
At the first meeting we can run this calculation with your own figures. The estimate is only as good as its assumptions, so we write them down and check them again after the pilot.
What to weigh before you start
- Cost: hardware and software up front, plus maintenance, support and training later.
- Time: how long installation takes and how much it will disturb production.
- Measurable goals: reject rate, inspection time, complaints. Agree on them before the pilot so the result can be checked.
- Risks: false rejects, missed defects and data security. Careful testing on the real line is the best protection.
Examples
See it in production
Packaging inspection on a real line
On a pet food packaging line, a Visioline camera photographs every pack through a tunnel window and the model marks it OK or NOK. A checkweigher weighs each pack and a rejector pushes faulty ones off the line. Three short videos show the line, the user interface and administration.
Products and technology in detail
machinevision.ee is our dedicated machine vision site: applications, hardware, models, integrations and the full implementation process, in English, Estonian, Finnish, Swedish and German.
FAQ
Frequently asked questions
What do you want to detect?
Describe the product, the defect or the situation you want to catch. We will tell you honestly whether machine vision is the right solution and what it would take.
